• cutting capacity up to 48 HRC hardness
• robust cutting edges are additionally inducti on-hardened, cutting edge hardness approx. 62 HRC
• forged-in stopper with comfortable shock- absorber
• good access due to very flat construction of head and joint area
• ergonomica lly angled handles to minimise effort
• sturdy non-slip two-colour multi-component handle slee ves
• precise adjustment (12 positions) by eccentric bolt
• high cutting performance wit h minimum effort due to optimum coordination of the cutting edge angle and transmission ratio
bolted cutter head, replaceable

Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.

Simplifies your work: Makes work easier, optimum impact effect and less effort needed.

Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.

Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.

Product dimensions: 880 x 205 x 82 mm (LxWxD)

Application: Ideal for powerful strokes, e.g., in fence construction, railroad construction, repair/maintenance, tool making/mechanical engineering, straightening work.

Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work

Rückschlagfreier Vorschlaghammer für kraftvolle Positionsschläge

Hammering without recoil minimizes stress on joints, tendons, and muscles

Optimum impact effect without recoil minimizes effort and reduces the risk of injury

Hickory-wood handle and hammer faces available separately as spare parts

In exacting work environments where both precision and power are demanded, the challenge is often to make effective strokes without stressing the user with recoils. The recoilless sledgehammer with hickory-wood handle makes it possible for the user to deliver powerful but measured positioning blows and simultaneously protect delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the sledgehammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The hammer also stands out thanks to its high-grade hickory-wood handle with a highly effective non-slip surface. The yellow, medium-hard hammer faces with a diameter of 50 mm are ideal for universal use in areas like tool making and mechanical engineering as well as for repairs or maintenance. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.

GS tested.

Meets your requirements: Variably adjustable torque covers a wide range of applications.

Simplifies your work: All tools securely arranged in a robust, orderly bag.

Increases your efficiency: The correct torque protects material from damage and means no follow-up work.

Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.

Lowers your costs: The correct torque protects you from warranty claims.

Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.

Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.

Product dimensions: 246 x 225 x 45 mm (LxWxD)

Application: For controlled fastening on live parts up to 1 000 V AC.

Standards: Manufactured acc. to IEC 60900.

Variably adjustable torque from 0.8 - 5.0 Nm

Acoustic and physically perceptible triggering signal protects against damage to materials and rework

slimBits allow access to low-lying screws thanks to inserted insulation

Safe operation up to 1,000 V AC

Expandable and compatible with EVF products

With 2 handles, 9 slimBits, adapter and setting tool in a practical and robust folding bag

The fully certified TorqueVario®-S VDE torque system offers fully controlled screw tightening coupled with safety for electronic applications. The tool set contains an ergonomically shaped torque screwdriver handle with integrated numeric scale, 9 slimBits, a bit holder, the adjusting tool, and also a screwdriver with SoftFinish® electric slimVario bit holder for slimBits. All components are arranged practically and clearly in a high-grade, hard-wearing bag, incl. the manufacturer's inspection process report. The VDE torque screwdriver covers a wide variety of applications with a variably adjustable torque range between 0.8 and 5.0 Nm. A clearly audible, physically perceptible signal emitted when the torque is produced guarantees process-safe torque mechanics, protecting against damage to materials and eliminating the need for retouching. With a release accuracy of +/-6%, the torque tool complies with the requirements of DIN EN ISO 6789. The insulated ClicFix bit holder guarantees a secure hold for 75 mm long slimBits thanks to mechanical blade locking. Both the torque screwdriver and the slimBits undergo routine testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.

DIN EN ISO 6789.

Content:

• 1x Torque screwdriver TorqueVario®-S electric variably adjustable torque limit 0.8 - 5 (26626)
• 1x Setting tool for torque screwdriver with long handle 90 mm (26864)
• 1x Screwdriver SoftFinish® slimVario® electric for slimBits 6.0 mm (34577)
• 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
• 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
• 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
• 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
• 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
• 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
• 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
• 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
• 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
• 1x Folding bag