Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 375 x 125 x 40 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work
Hammering without recoil minimizes stress on joints, tendons, and muscles
Optimum impact effect without recoil minimizes effort and reduces the risk of injury
Hickory-wood handle and hammer faces available separately as spare parts
Especially on delicate surfaces, choosing the right hammer is crucial to avoid damage. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The hammer also stands out thanks to its high-grade hickory-wood handle with a highly effective non-slip surface. The yellow, medium-hard hammer faces with a diameter of 50 mm are ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Lowers your costs: Prevents damage caused by lost circlips in the work area.
Saves time: Safe and sturdy grip on circlips.
Product dimensions: 303 x 178 x 16 mm (LxWxD)
Application: For fitting / removing circlips externally to / from shafts or axles.
Supplementary information: with safety latching function MagicTips®
DIN ISO 5254.
Meets your requirements: Safe pressing in marked trapezoidal/semi-circular profiles.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 190 x 62 x 28 mm (LxWxD)
Application: For work in the area of live parts up to 1,000 V AC.
Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.
Standards: DIN ISO 5743.
Manufactured acc. to IEC 60900.
Lowers your costs: The correct torque protects you from warranty claims.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Product dimensions: 135 x 35 x 35 mm (LxWxD)
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Accuracy: ±10%
Handle: Multi-component handle optimally designed for the hand enables optimal power transmission.
Handle: Audible and perceptible click when the pre-set torque has been attained.
Handle: Mechanism insensitive to industrial lubricants.
Handle: Compatible with all blades of the 2859.
Are you looking for controlled screw tightening without damage to materials and follow-up work? No problem with the easyTorque torque screwdriver, which ensures process safety in its application. Thanks to a click signal when reaching the set torque value, the work piece remains undamaged and protects you from warranty claims. The multi-component handle, which is ergonomically designed for the hand, enables optimum power transmission while protecting your health. In addition, the torque screwdriver is also compatible with all blades from the 2859 series. With its mechanics that are not affected by industrial lubricants, the torque screwdriver is your perfect companion for comfortable work. Designed based on the standard EN ISO 6789, the torque tool offers a release accuracy of +/- 10%.
Bit holders or blades are not included in delivery.
Based on DIN EN ISO 6789.
Lowers your costs: The correct torque protects you from warranty claims.
Increases your efficiency: The correct torque protects material from damage and means no follow-up work.
Product dimensions: 135 x 35 x 35 mm (LxWxD)
Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade.
Accuracy: ±10%
Handle: Multi-component handle optimally designed for the hand enables optimal power transmission.
Handle: Audible and perceptible click when the pre-set torque has been attained.
Handle: Mechanism insensitive to industrial lubricants.
Handle: Compatible with all blades of the 2859.
Are you looking for controlled screw tightening without damage to materials and follow-up work? No problem with the easyTorque torque screwdriver, which ensures process safety in its application. Thanks to a click signal when reaching the set torque value, the work piece remains undamaged and protects you from warranty claims. The multi-component handle, which is ergonomically designed for the hand, enables optimum power transmission while protecting your health. In addition, the torque screwdriver is also compatible with all blades from the 2859 series. With its mechanics that are not affected by industrial lubricants, the torque screwdriver is your perfect companion for comfortable work. Designed based on the standard EN ISO 6789, the torque tool offers a release accuracy of +/- 10%.
Bit holders or blades are not included in delivery.
Based on DIN EN ISO 6789.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Product dimensions: 198 x 130 x 45 mm (LxWxD)
Application: For screw fastening on live parts up to 1,000 V AC.
Kind to hands and muscles
Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs
Safe operation up to 1,000 V AC
slimBits allow access to low-lying screws thanks to inserted insulation
Versatile use
Electricians are often faced with different screw profiles when working on live parts during their daily work. With the SoftFinish® screwdriver handle, including interchangeable slimBits, multiple applications can be covered without having to carry a separate screwdriver for each profile. The ergonomically shaped screwdriver handle with roll-off protection fits perfectly in the hand, protecting joints and tendons as users work. Thanks to Wiha slimTechnology, the contained slimBit blades are up to 33% slimmer and can thus * easily reach deep-set screw and spring elements. The insulated screwdriver handle and * slimBits undergo routine individual piece testing as per the international IEC 60900 standard, allowing users to work safely on live parts up to 1,000 V AC.
Manufactured acc. to IEC 60900.
Content:
- 1x Screwdriver with bit holder SoftFinish® electric slimVario for slimBits (41927)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ1 x 75 mm (34589)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Increases your efficiency: Clean work thanks to cable cutting without crushing.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 215 x 55 x 28 mm (LxWxD)
Application: Cable cutter for cutting of copper and aluminium cables without crushing, also suitable for stripping.
Application: Not for steel cable, wires and copper conductors with hard coatings.
Application: For work in the area of live parts up to 1,000 V AC.
Simplifies your work: Unrestricted access to hard-to-reach work areas thanks to extremely slim handle shape.
Saves money: Two tools in one for cutting to length and skinning.
Increases your efficiency: Damage-free stripping thanks to automatic adjustment to cable diameter.
Product dimensions: 240 x 110 x 30 mm (LxWxD)
Application: For precise and safe stripping of cables up to 6 mm².
For cutting Cu and Al leads with a diameter of up to 2 mm.
Skinning: 0.2 - 6 mm² Cutting to length: max. 2 mm²
Adjustable length stop from 5 - 12 mm
Compact and space-saving
Cutting solid / stranded: max 3 mm² / max 6 mm²
Electricians need to strip cables often when installing electrical systems. Their equipment would be incomplete without a stripping tool. Wiha's automatic stripping pliers allow stripping of all standard leads from 0.2 to 6 mm². The lightweight pliers ensure quick and precise skinning thanks to an integrated scanning system that adjusts automatically to the respective lead cross section, effectively preventing damage to the interior lead. In addition, the leads can be custom stripped with the adjustable length arrester from 5 - 12 mm. If needed, the length arrester can also be entirely removed from the tool. In addition to skinning, the stripping pliers can be used as diagonal cutters for cutting cables up to a diameter of 2 mm to length. The blades of the stripping tool are made of high-quality sturdy cutlery steel and can be replaced, if required. Space-saving and secure locking is ensured by the arrest option on the tool.
Increases your efficiency: Your daily companion - always have the relevant profiles with you.
Saves space: Compact and light tool, fits into any pants pockets.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 111 x 35 x 35 mm (LxWxD)
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Simply pull - magnetic closure
Fits in every trouser pocket
slimBits allow access to low-lying screws thanks to inserted insulation
Safe operation up to 1,000 V AC
Expandable and compatible with EVF products
Multitools are truly multi-faceted, if only they were not so large and heavy. The compact and light PocketMax® from Wiha conveniently fits into any shirt or pants pocket and is the ideal companion for every electrician. Securely stowed away in the handle, the bit depot includes four slimBits. Thanks to a magnetic shut function, the bit depot can very easily be opened to remove the slimBits. Searching for the right bit is therefore a thing of the past. During closing, the bit depot smoothly and easily glides back into the shaft and practically closes by itself thanks to the magnet. The twistable cap brings a further advantage, ensuring convenient handling. The PocketMax® electric also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section.
Tested according to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Wiha
Increases your efficiency: Fastening without interruption thanks to a finely toothed ratchet wrench.
Increases your flexibility: Adjustable right or left rotation through switching lever.
Product dimensions: 135 x 25 x 22 mm (LxWxD)
Application: For installation and mounting work.
Non-slip ergonomic handle
Protects the fingers thanks to its cropped design
Perfect for confined spaces thanks to its fine toothing
Secure hold and easy replacement of the nuts thanks to quick release detent retaining ball at the push of a button
Tightening and loosening strongly tightened hex screws and nuts requires an enormous amount of force. With the reversible ratchet from Wiha users can easily open and close any screw connection. Thanks to the non-slip two-component handle work is particularly ergonomic and comfortable. The compact ratchet head additionally allows working in confined spaces. The cropped design ensures an elevated holding position, which supports a powerful grip and protects the fingers from injury. The finely serrated ratchet with 72 teeth also has a short return angle of 5° that also enables work in the tightest of spaces. Using a switching lever, right or left rotation can be easily adjusted. The robust reversible ratchet allows safe working and can withstand loads far beyond the DIN requirements up to a torque of 93 Nm. The push button on the ratchet head releases the detent retaining ball and serves the easy and quick replacement of box nuts or adapters. Made of high quality chrome vanadium steel, the reversible ratchet is distinguished by its longevity and robustness.
Based on DIN 3122/ISO 331.
