Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- for powerful cutting of larger cross-sections as well as very hard materials
- two-han d operation for maximum cutting force
- 60% less effort required compared to conventional high -leverage diagonal cutters
- 40-fold increase of manual force due to special joint design
- With gripping surface below the joint for gripping and pulling wires from Ø 1.0 mm
- induc tion-hardened precision blades: cutting edge hardness approx. 64 HRC
- Straight cutting edges for easier cutting of flat material, also suitable for thin round material
- Cut and chamfer all common domestic plastic drain pipes up to Ø 50 mm in a single operation< /li>
- Reversible high-quality ball-bearing steel blade, can be easily replaced without tools < li>Clean cut: no readjusting or deburring required, reducing potential blockages or damages of the s eals
- Cuts high temperature and other plastic pipes with Ø 32, 40 or 50 mm and wall thickness es up to 2.4 mm
- Optimal cutting due to slide-bearing and self-adjusting guide rolls
- Easy positioning due to clear view of cutting point
- Spring-loaded blade: no inconvenient rea djusting while cutting
- Exchangeable blade with two cutting edges can be reversed when showin g signs of wear
- Cuts lengths as small as 10 mm
- Housing made of glass fibre reinforce d plastic
- for data cables in telecommunication and networks
- For shielded and unshielded Wester n plugs RJ45 (8P8C)
- With adjustable retaining bracket, for all common RJ45 plugs with closed and non-closed housings
- Separate crimping die for strain relief (cable clip)
- Quick cutting and stripping of CAT-cables with high-quality blades
- Precise crimping process thanks to parallel crimping
- Repetitive, high crimping quality due to ratchet mechanism (unlockable )
- optimum transmission of force due to lever action for fatigue-reduced operation
- For reliable tool protection: holding capacity tested in numerous drop tests for tools up to 6 kg, even battery-operated tools
- Large working radius: long lanyard for convenient working
- Reduces the risks of tool loss, injury to living beings and damage to objects
- To me et regulations while working at heights, for example industrial climbing, arborists, rescue services , at sea, etc.
- Tether can be attached directly to the cord side or the carabiner to climbing equipment
- The roughly 90 cm long gathered fabric strap tether stretches to a length of abou t 1.5 m when weight is applied
- with strap made of a flat belt sewn to one end and a cord and cord stopper sewn into the other end, each sewn four times
- The additional loop on the lanya rd allows for direct connection of the tool to the climbing equipment with a carabiner (sold separat ely)
- Cord stopper made of solid aluminium, also available as a spare part
- For KNIPEX pliers with tether attachment point only with 1.5 kg adapter strap 00 50 02 T
- No PPE (perso nal protective equipment): not suitable for personal safety!
- Contents: lanyard 00 50 10 T, w ith fixed equipment carabiner 00 50 03 T
Meets your requirements: Yellow hammer head / medium-hard: e.g. for tool and machine engineering, car repairs, sheet metal and assembly work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Protects your health: Deadblow Hammering without recoil minimises loads on joints, tendons and muscles.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 380 x 130 x 45 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-hard hammer heads eminently suitable for tool and machine engineering, car repairs as well as sheet metal and assembly work.
Yellow hammer face (medium-hard) for tool manufacture / mechanical engineering, automobile sector, or sheet metal and assembly work
Hammering without recoil minimizes stress on joints, tendons, and muscles
Optimum impact effect without recoil minimizes effort and reduces the risk of injury
Hickory-wood handle and hammer faces available separately as spare parts
Especially on delicate surfaces, choosing the right hammer is crucial to avoid damage. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The hammer also stands out thanks to its high-grade hickory-wood handle with a highly effective non-slip surface. The yellow, medium-hard hammer faces with a diameter of 50 mm are ideal for universal use in areas like tool making and mechanical engineering as well as sheet metal and assembly work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Increases your efficiency: Narrow, pointed plier head guarantees optimal accessibility even to areas that are difficult to access.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 106 x 92 x 18 mm (LxWxD)
Application: For virtually flush cutting copper wire in flat places which are difficult to access.
Standards: IEC 61340-5-1.
DIN ISO 9654.
Meets your requirements: For completely flush cutting of soft copper wires.
Protects your health: Reduces strain from continuous work thanks to opening spring.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Product dimensions: 170 x 100 x 28 mm (LxWxD)
Application: For absolutely flush cutting of copper wire.
Standards: IEC 61340-5-1.
DIN ISO 9654.
Increases your efficiency: Screwdriver handle size concept for optimal balance between precision and control.
Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.
Product dimensions: 211 x 30 x 30 mm (LxWxD)
Application: Particularly suitable for dry applications.
Material: Chrome-vanadium-molybdenum steel, matt chrome-plated
DIN ISO 8764-PH.
Meets your requirements: Permanently stable through box joint with double guidance.
Increases your efficiency: Fast and simple adjustment of pliers with push button.
Lowers your costs: Durable thanks to high-quality, chrome-plated plier surface to prevent corrosion.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Product dimensions: 260 x 70 x 28 mm (LxWxD)
Application: For gripping and holding pipes and angular profiles as well as hexagon nuts in installations.
For working on live parts up to 1,000 V AC.
Standards: Manufactured acc. to IEC 60900.
Turning, pulling, gripping and holding of e.g. pipes or tightening screws and nuts
9-level gradation - flexible adjustment of the gripping width at the push of a button
Secure hold on the workpiece thanks to self-clamping
Highest stability thanks to a box type joint
Kind to hands and muscles
Safe operation up to 1,000 V AC
Installation projects often involve pipes, nuts, as well as rounded and edged materials in a variety of dimensions. Water pump pliers offer the optimal grip for all occasions. With a 9-step detent adjustment it offers maximum variability in the installation area, where it can be quickly and easily adjusted and locked at the push of a button. Crushing injuries are prevented thanks to the integrated clamping protection. Double guidance based on a box joint ensures the greatest stability of the pliers. At the same time, the slim design in the head and joint area provides reliable access to the work piece, even in confined areas. The handles of the pliers are covered in anti-slip plastic and offer users a strong grip, even in oily or wet work situations. The ergonomically shaped handles of the pliers also ensure comfortable, fatigue-proof work. In addition, slipping off the work piece is prevented by the self-clamping on pipes and nuts, thus enabling highly comfortable work. When in use, the high-quality specially hardened teeth guarantee a reliable secure grip with long-term durability. The robust water pump pliers are dirt resistant. The water pump pliers are manufactured as per the international IEC 60900 standard and thus approved for working on live parts up to 1,000 V AC.
DIN ISO 8976.
