Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
- for powerful cutting of larger cross-sections as well as very hard materials
- two-han d operation for maximum cutting force
- 60% less effort required compared to conventional high -leverage diagonal cutters
- 40-fold increase of manual force due to special joint design
- With gripping surface below the joint for gripping and pulling wires from Ø 1.0 mm
- induc tion-hardened precision blades: cutting edge hardness approx. 64 HRC
- blades with recess for easier cutting of round material like hard wires due to better leverage close to the fulcrum
- high transmission ratio for easy cutting
- requires 50 % less effort compared with con ventional combination pliers due to optimised transmission ratio
- solid construction for heav iest strain
- universally applicable
- ergonomically optimised handle shape for firm co ntact to the hand and fatigue reducing operation
- particularly effective cross-hatched knurle d gripping zone in the jaws - for strong gripping and pulling
- additional gripping zone below the joint for powerful leverage and pressing performance
- with cutting edges for soft and ha rd wire
- cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC< /li>
- American style
- pliers with tether attachment point for mounting a fall protection sy stem
- Wire stripper with cable shears - two essential electrical installation tools in one pair of pliers
- Integrated cable shears for the clean cutting of Cu- and Al-cables without crushing up to Ø 15 mm (5 x 2,5 mm²)
- cutting edges additionally induction-hardened, cutting edge hard ness approx. 57 HRC
- Universal adjustment of the stripping blades by means of a knurled screw
- slim dimensions for easy access
- Stripping of single-, multi- and fine stranded cond uctors with plastic or rubber insulation up to Ø 5 mm or 10 mm² cross-section
- Graduated jaw provides a visual orientation aid when stripping wire in standard lengths (11 mm and 16 mm)
- for very tough, continuous use
- high cutting performance with minimum effort due to o ptimum coordination of the cutting edge angle and transmission ratio
- precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire inclu ding piano wire
- Pliers with integrated, insulated tether attachment point for a tool tether< /li>
- Clever stripping: large capacity range, sharply ground stripping profiles and intuitive posi tioning
- Innovative cutting geometry: easier cutting, especially of flat cables
- Hybri d design: as flat as needle-nose pliers, as wide as combination pliers for high stability with good accessibility
- Precisely ground stripping profiles for solid conductors from 0.75 - 6 mm² and fine-stranded conductors from 0.5 - 4 mm²
- Precise positioning of the wire thanks to locatio n ridges
- Easy cutting of copper and aluminium cables up to Ø 15 mm (1/2")
- Wide, cros s-hatched gripping surfaces for twisting wires
- Milled groove for secure holding and pulling of small work pieces such as nails
- Convex gripping surface on one side for secure gripping o f flat material and gripping area for round material
- Outer edges for deburring pipes
Meets your requirements: Black hammer head / medium soft: e.g. for paving, tiling, dry wall construction. Orange hammer head / hard: e.g. for assembly and dismantling work, building and construction work, repair work.
Simplifies your work: Makes work easier, optimum impact effect and less effort needed.
Lowers your costs: Ergonomic hickory wooden handle and hammer head both available as spare parts.
Product dimensions: 400 x 150 x 69 mm (LxWxD)
Application: Ideal for delivering measured positioning blows on components such as work pieces in machine vices or for installation work. Medium-soft hammer faces are eminently suitable for the paving or tiling trade as well as for prefabricated house construction. Hard hammer faces for assembly and dismantling work as well as in the building trade and in shop work.
Black hammer face (medium soft) for the paving / tiling trade and prefabricated house construction
Orange hammer face (hard) for assembly and dismantling work, the building trade and shop work
Recoiling impact effect minimizes the effort in a series of impacts
Protects the material being processed thanks to safety hammer faces
Hickory-wood handle and hammer faces available separately as spare parts
Depending on the site of operation, different hammer heads are needed to meet the specific requirements of various tasks. The recoilless, soft-faced hammer with hickory-wood handle makes it possible for the user to deliver measured positioning blows and protects delicate surfaces and edges due to its high-impact effect. Thanks to the special metal filling in the hammer head, the soft-faced hammer also guarantees absolutely no recoil, thus protecting joints. In addition, the approx. 25% greater mass of the hammer head ensures added power and easier work, optimum impact effect, and less effort needed as a result. The Safety Hammer is also distinguished by its high-grade hickory hammer handle with highly effective non-slip surface. The black, medium-soft hammer face with a diameter of 30 mm is ideal for the paving or tiling trade as well as for prefabricated house construction. The orange, hard hammer face also with a diameter of 30 mm is suited for assembly and dismantling work as well as in the building trade and in shop work. The hammer faces and the ergonomic hickory-wood handle are available as spare parts.
GS tested.
Simplifies your work: Unrestricted access to low-lying screws thanks to bit holder lengths of up to 250mm.
Increases your efficiency: Unlimited access to deep-set screws thanks to extreme slimline design.
Product dimensions: 100 x 10 x 10 mm (LxWxD)
Standards: for bits DIN 3126, ISO 1173, shape C6.3
DIN 3126, ISO 1173, Style E6,3
