Dreusicke offers the fine tools you will need for the maintenance and repair of office machines, computers, electronic and/or fine-mechanical devices. (for commercial users only)
Increases your efficiency: Wiha MagicSpring® holding feature holds all Torx® screws in place without a magnet.
Makes handling easier: Always the correct key when you need it.
Saves time: Ensures order: removal and targeted insertion in the holder is child's play.
Application: For setting and tightening TORX® screws in difficult to access areas.
Supplementary information: MagicSpring® from size T6
Easy removal
Quick selection
Nonmagnetic holding feature
It's a common experience. It's not easy to remove individual keys from many L-key holders or place them back in the holder again. With Wiha ErgoStar, you can now say goodbye to such problems as it eliminates them in an ingenious way. Turning one L-key in the holder makes all other keys turn to the side at the same angle, enabling you to remove the key you need quickly and comfortably. A clamping mechanism in the holder makes sure that the keys cannot fall out, regardless of whether the holder is open or closed. Thanks to the MagicSpring® holding feature with its spring steel ring, the L-keys hold all TORX® screws firmly in any position perfectly without *the need of magnets. The set contains thirteen black-oxidised TORX® L-keys in standard sizes. The hanging bracket on the holder allows users to hang the L-key set up directly at their workstation.
Content:
- 1x L-keys TORX®, black oxidised T5 x 72 mm (24313)
- 1x L-keys TORX® MagicSpring®, black oxidised T6 x 80 mm (31233)
- 1x L-keys TORX® MagicSpring®, black oxidised T7 x 88 mm (31234)
- 1x L-keys TORX® MagicSpring®, black oxidised T8 x 101 mm (31235)
- 1x L-keys TORX® MagicSpring®, black oxidised T9 x 111 mm (31236)
- 1x L-keys TORX® MagicSpring®, black oxidised T10 x 121 mm (31237)
- 1x L-keys TORX® MagicSpring®, black oxidised T15 x 136 mm (31238)
- 1x L-keys TORX® MagicSpring®, black oxidised T20 x 148 mm (31239)
- 1x L-keys TORX® MagicSpring®, black oxidised T25 x 163 mm (31240)
- 1x L-keys TORX® MagicSpring®, black oxidised T27 x 176 mm (31241)
- 1x L-keys TORX® MagicSpring®, black oxidised T30 x 191 mm (31242)
- 1x L-keys TORX® MagicSpring®, black oxidised T40 x 210 mm (31243)
- 1x L-keys TORX® MagicSpring®, black oxidised T45 x 232 mm (31244)
- 1x ErgoStar holder
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Protects your health: No risk of injury, *all bits stowed safely inside the handle.
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Note: Not for use with bit styles C 6.3 and E 6.3.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to integrated insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button, making it easy to take out the bits. The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Note: Not for use with bit styles C 6.3 and E 6.3.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to integrated insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button, making it easy to take out the bits. The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 3.0 mm x 75 mm (34579)
- 1x slimBit electric bit Slotted 4.0 mm x 75 mm (34580)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Phillips PH1 x 75 mm (34583)
- 1x slimBit electric bit Phillips PH2 x 75 mm (34584)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Note: Not for use with bit styles C 6.3 and E 6.3.
Clearly arranged and easy to remove
Saves 75% of space
slimBits allow access to low-lying screws thanks to integrated insulation
Expandable and compatible with EVF products
Safe operation up to 1,000 V AC
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button, making it easy to take out the bits. The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit TORX® T8 x 75 mm (35506)
- 1x slimBit electric bit TORX® T9 x 75 mm (41160)
- 1x slimBit electric bit TORX® T10 x 75 mm (35507)
- 1x slimBit electric bit TORX® T15 x 75 mm (35508)
- 1x slimBit electric bit TORX® T20 x 75 mm (35509)
- 1x slimBit electric bit TORX® T25 x 75 mm (36071)
Increases your efficiency: Wiha LiftUp electric saves 75% volume and 50% less weight for 100 % efficiency.
Protects your health: No risk of injury, all blades stowed safely inside the handle.
Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC.
Increases your safety: Wiha slimBits ensure good, protected access to deep-set screws.
Application: Suitable for controlled fastening for live parts up to 1,000 V AC, especially for portable use.
Note: Not for use with bit styles C 6.3 and E 6.3.
slimBits allow access to low-lying screws thanks to integrated insulation
Clearly arranged and easy to remove
Saves 75% of space
Expandable and compatible with EVF products
The screwdriver with the bit magazine LiftUp electric is the ideal companion for every electrician out on a job. The bit depot hidden in the handle provides space for 6 standard slimBits and extends out of the magazine at the press of a button, making it easy to take out the bits. The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. The magazine bit holder also ensures maximum safety. Both the magazine bit holder and the slimBits that it contains are certified to the international IEC 60900 standard. The slender, 75 mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section. The twistable cap brings a further advantage, ensuring convenient handling.
6 mm slimBits only to be used in the slimVario® bit holder and slimTorque VDE bit holder (VDE torque system).
Manufactured acc. to IEC 60900.
Content:
- 1x slimBit electric bit Slotted 2.5 mm x 75 mm (34578)
- 1x slimBit electric bit Slotted 3.5 mm x 75 mm (41159)
- 1x slimBit electric bit Slotted 5.5 mm x 75 mm (34581)
- 1x slimBit electric bit Pozidriv PZ1 x 75 mm (34585)
- 1x slimBit electric bit Pozidriv PZ2 x 75 mm (34586)
- 1x slimBit electric bit PlusMinus/Pozidriv SL/PZ2 x 75 mm (34590)
Simplifies your work: With a practical plastic holder to hang up or stand on a surface.
Increases your efficiency: Screwdriver handle size concept for optimal balance between precision and control.
Lowers your costs: Electrostatically conductive tools protect electronic components from damage.
Increases your efficiency: Careful workmanship and controlled power transmission thanks to the slim handle with soft grip.
Makes handling easier: Extra-long rotating cap ensures optimum feed.
Application: Ideal for fine and delicate fastening tasks on components at risk of electrostatic discharge.
The challenge when working on electronic components is that they can become damaged even at the lowest voltages. The electrostatically conductive fine screwdriver PicoFinish® ESD masters such tasks effortlessly. Thanks to their long, slim handles and quick-turning zone, these fine screwdrivers are ideal for careful, precise work practices on delicate workpieces. Their ergonomic handle design with soft zone makes them comfortable to use. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. The printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile. The dissipative tool safely channels electrostatic energy away in a controlled fashion. The ESD fine screwdrivers are manufactured in compliance with international IEC standard 61340-5-1, thus guaranteeing maximum protection for electronic components. These screwdrivers have a surface resistance between 10^6 - 10^9 ohm.
Content:
- 1x Fine screwdriver PicoFinish® ESD TORX® T5 x 40 mm (43698)
- 1x Fine screwdriver PicoFinish® ESD TORX® T6 x 40 mm (43699)
- 1x Fine screwdriver PicoFinish® ESD TORX® T7 x 40 mm (43700)
- 1x Fine screwdriver PicoFinish® ESD TORX® T8 x 40 mm (43701)
- 1x Fine screwdriver PicoFinish® ESD TORX® T10 x 50 mm (43703)
- 1x Fine screwdriver PicoFinish® ESD TORX® T15 x 60 mm (43704)
- 1x holder
Simplifies your work: The ball end facilitates access to screws and allows you to work at an angle of up to 25°.
Makes handling easier: Always the correct key when you need it.
Saves time: Ensures order: removal and targeted insertion in the holder is child's play.
Application: For all hard-to-reach TORX® screws.
Extra: Mechanical operation of the space-saving ErgoStar holder makes simplest removal of each individual L-key possible without movement of the others.
Extra: TORX® ball end (from T9 size) enables fastening at an angle of up to 25°.
Extra: With elongated TORX® profile behind ball end.
Supplementary information: TORX® ball end starting from size T9
Blade: Chrome-vanadium steel, through hardened, black-finish.
Quick selection - Easy removal
Perfect for confined spaces
Perfect for confined spaces
Content:
- 1x L-keys TORX®, black oxidised T5 x 72 mm (24313)
- 1x L-keys TORX®, black oxidised T6 x 80 mm (24314)
- 1x L-keys TORX®, black oxidised T7 x 88 mm (24315)
- 1x L-keys TORX®, black oxidised T8 x 101 mm (24316)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T9 x 111 mm (32386)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T10 x 121 mm (32387)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T15 x 136 mm (32388)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T20 x 148 mm (32389)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T25 x 163 mm (32390)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T27 x 176 mm (32391)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T30 x 191 mm (32392)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T40 x 210 mm (32393)
- 1x L-keys ProStar TORX® hexagonal ball end, black oxidised T45 x 232 mm (33749)
- 1x ErgoStar holder
